In this report we’re going to look at how to create your own dog mask. We’ll cover the basics and then go on to take a look at a number of the more advanced tips and techniques which you can use.

If you have a dog that likes to bark, and particularly if your dog loves to play in the garden and other areas of the home, you need to get them some special dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the first part of the set-up which will look a little scary at first, but it’s really very straightforward. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can’t simply cut a rectangular shape from the cardboard, so you will need to cut around the edge of the mask so you get something which resembles a cone. The most important thing here is to be realistic with what kind of paper plate that you’re using.

Then you’ll need to wrap the cardboard around the edges of the paper plate, making certain there is a good seal between the two pieces so that you can ensure that nothing will leak once you place the mask on. Make sure the edges are cut so that the edges aren’t sharp, as this may damage the edges of the mask.

Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making certain it runs smoothly and evenly across the entire mask. You’ll want to start with one side of the mask , so that you can work your way around it before moving onto the other side. The paint needs to be slightly thicker than the cardboard, and it is best that you leave about one-third of an inch of paint on the edges so that it runs over the cardboard.

Don’t worry too much about the paint getting stuck into your mask. It’s easy to eliminate it later, and it’ll leave you with a nice finished mask to show off to everyone! It’s also a good idea to wipe away any excess paint once you are done, so you don’t end up with smudges or smears on your dog.

Then it’s time to glue the mask on your dog’s head. First you will need to make sure that you get a secure fit between the mask and your dog’s head. As soon as you’ve made sure that it is secure, then you can begin to glue the mask on the dog’s face. Take the piece of cardboard that is used for the base of the mask and then fold it over. Make certain it’s quite powerful and then use your hands to secure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds till you’ve got the mask snugged securely onto the face of your dog. Do not make the folds too large or else it might look messy. As soon as you’ve completed this, you can then take url out the mask and then attach the cardboard ears. And attach the other part of the mask on the dog. Make certain the ears are level and make certain it is not too short or long as this can cause some issues with the mask slipping off the dog’s face.

If you’re using a dog mask because your dog protection, you will have to do some sanding to be sure that it is secure on your dog. You can do this by sanding off any excess paper that may have been removed from your mask.